- Extends HDMI1.3 at 1080p60 up to 100 mtrs (330ft)
- Built-in IR Blaster allows IR remote control of source devices from remote viewing location
- Supports resolutions up to 1080p and 1920 x 1200
- Supports high bit-rate audio formats (Dolby TrueHD / DTS Master Audio)
- Fully HDMI and HDCP compliant (when both power supplies are used)
- 4x DIP switches allow EDID selection
- Locking power connectors on unit and power supplies for secure connections
|
 |
|
The Extender for HDMI 1.3 over CAT5 with Ethernet extends your Hi-Def display with multi-channel digital audio at resolutions of up to 1080p60 up to 330 feet (100 meters) away from your HDMI or DVI-D source using one CAT-5 cable. It also extends Ethernet and provides an IR back channel to control AV sources using the same CAT-5 cable extension. With the built-in IR Blaster, simply point the IR remote(s) at the display to control the Hi-Def sources as if they were located in the same room as the display.
DVI-D is supported when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components.
|
|
|
See PDF Datasheet For Further Technical Information |
 |
Package Content |
|
1x HDMI1.3 CAT-5 ELR Sender unit |
|
1x HDMI1.3 CAT-5 ELR Receiver unit
|
1x 6 ft HDMI locking cable
|
2x 5V DC Locking Power Supplies
|
| 1x User's Manual |
|
Block Diagram |
|
|
|
|
Model
|
Optional Accessories
|
|
EXT-2IREMIT |
Dual Infrared Transmitter
|
|
EXT-RMT-EXTIR |
RMT IR Extender
|
| |
|
For help in configuring, prices on larger quantities & delivery times,
call 01202 872771 or email techsales@itm-components.co.uk |
|
