NTI Enviromux Mini Sensors & Accessories

Products - Home Environment Monitoring Sensors & Accessories - Mini

NTI Enviromux Mini Sensors & Accessories

5 Products

Enviromux-TRH Temperature/Humidity sensor for ENVIROMUX MINI

Applications from 32°F to 104°F (0ºC and 40ºC) and 20% to 80% relative humidity.
High resistance to external influences on the cable due to digital output signal.
Accurate to within ±1.35°F (±0.75ºC) and ±5% relative humidity.
Re-calibration is not necessary after initial set-up.
Available lengths: 3/7/10/25 feet.
Includes mounting hardware.
Regulatory approvals: CE, FCC, RoHS

Enviromux-T Temperature Sensor for ENVIROMUX MINI

For use with ENVIROMUX-MINI.
Applications from 32°F to 104°F (0ºC to 40ºC).
High resistance to external influences on the cable due to digital output signal.
Accurate to within ±1.35°F (±0.75ºC).
Re-calibration is not necessary after initial set-up.
Available lengths: 3/7/10/25 feet.
Includes mounting hardware.
Regulatory approvals: CE, FCC, RoHS

Enviromux-RH Humidity Sensor for ENVIROMUX MINI

For use with ENVIROMUX-MINI.
Applications from 20% to 80% relative humidity at temperatures between 0ºC and 40ºC.
High resistance to external influences on the cable due to digital output signal.
Accurate to within ±5% relative humidity.
Re-calibration is not necessary after initial set-up.
Available lengths: 3/7/10/25 feet.
Includes mounting hardware.
Regulatory approvals: CE, FCC, RoHS

Enviromux-LD Liquid Detection Sensors for ENVIROMUX MINI

For warning of flooding.
100% waterproof electronics.
Detects any conductive liquid.
Puddle: 0.6" diameter.
Detects liquid depth >0.1".
Available lengths: 3/7/10/25 feet.
Regulatory approvals: CE, FCC, RoHS

Please call for prices and lengths

NOTE ON CABLE SELECTION - Two cables are required, the water sensor cable and a separate two wire cable. The water sensor connects to the 2-wire cable with a built-in connector, and the 2-wire cable connects to the sensor unit via screw terminal. (See diagram below).

Distributed Water Sensor Cable:
ENVIROMUX-LD water sensor cable is available in lengths from 1 to 1000 feet, to be selected for the application. e.g The amount of distributed sensor cable to cover the area to be monitored.

Two Wire Interface/ Extension Cable
The distributed water sensor cable can be located up to 100 feet away from the LD sensor unit via 2-wire cable.

The LD sensor unit can be located up to 1,000 feet away from the ENVIROMUX-Mini via CAT5/5e/6 cable.

If water or other conductive liquid contacts the water sensor cable, the ENVIROMUX-LD reports the detection to the ENVIROMUX-Mini.

Enviromux-TDS Tamper switch for ENVIROMUX-MINI

Price: £6.95 (Ex VAT)

Quantity: