NTI Introduces Audio/Video Matrix Switch via CAT5
ITM announced the addition of the VEEMUX™ Audio/Video Matrix Switch via CAT5 to its popular line of video matrix switches. It is used to switch audio and video from many computers to multiple monitors, projectors and speakers. The switch eliminates bulky hard-to-manage coax cables by using CAT5 cable, which is more compact and easy to install in a building.
The VEEMUX Audio/Video Matrix Switch via CAT5 works with NTI's CAT5 transmitters and receivers to create a high performance audio/video signal routing system with a maximum extension of 600 feet between the Local and Remote Units.
A single computer audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system. Switch configuration can be done over the Internet via web page or telnet. Push-buttons on the front of the unit provide an additional control option.
This easy-to-use switch is the ideal solution for any application where information from multiple computers is being presented, such as classrooms, boardrooms, trade shows, conference and entertainment facilities, courtrooms, control rooms and command centers.
Immediately available, the VEEMUX Audio/Video Matrix Switch via CAT5 supports 1024x768 video resolution at 600 feet and 1920x1440 video resolution at 100 feet. A maximum bandwidth of 175 MHz is supported through the switch.
ITM Components will be pleased to assist with product selection and user questions (01202 872771 e-mail ).
ITM Components web site: www.itm-nti.co.uk.
Press Release
March 2, 2009
Editorial Contact:
ITM Components Ltd
Ian Flemming
Phone: 01202 872771
Fax: 01202 871052
Email:
| 
