VEEMUX Audio/Video Matrix Switch via CAT5 - NTI       NTI VEEMUX SM-nXm-C5AV-LCD Audio/Video Matrix Switch Via Cat5   Specifications VEEMUX SM-nXm-C5AV-LCD Female RJ45 input/output connectors. Analog bandwidth: 175 MHz. 10BaseT ethernet interface. Power 110 or 220 VAC at 50 or 60 Hz via IEC connector. Remote Unit (Receiver) Video Crisp and clear 1024x768 resolution up to 183 meters. Female 15-pin HD or female 4-pin miniDIN connectors. Output impedance: 75 Ohms. Maximum output level: 1.45Vp-p. Audio 3.5mm female stereo audio jack. Frequency response: 20 Hz to 20 kHz, +/-1dB. Signal-to-Noise Ratio (SNR): 76 dBA. Total Harmonic Distortion and Noise (THD+N): 0.017%. Stereo crosstalk: -70 dB. Line level output; supports multimedia speakers. Maximum output levels: 3.1Vp-p (line level). Power 110 or 220 VAC at 50 or 60 Hz via AC adapter. Local Unit (Transmitter) Supports VGA or S-Video and stereo audio. Video Compatible with SVGA, XGA, and VGA and S-Video. Male 15-pin HD or male 4-pin miniDIN connector. Input impedance: 75 Ohms. Maximum input levels: 1.45Vp-p. Supports Separate and Composite TTL level sync and Sync on Green. Input Sync frequency ranges: Horizontal: 15 kHz to 130 kHz. Vertical: 30 Hz to 150 Hz. Video is DC coupled. Audio 3.5mm stereo audio plug. Input impedance: 10k Ohms. Maximum input levels: 3.1Vp-p (line level). Power 110 or 220 VAC at 50 or 60 Hz via AC adapter. Features & Applications Configure over the Internet via web page or telnet. Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface. Can be remotely controlled via a web browser, telnet or RS232 interface. Equipped with Liquid Crystal Display (LCD). A digital VU-meter shows the audio levels of the selected output. Each output provides one video signal and one audio signal. Each input can be independently connected to any or all outputs. No loss of audio or video quality between ST-C5VA-600 local and remote units. VGA and S-Video transmitters and receivers can be supported on the same VEEMUX unit. VGA inputs only work with VGA outputs and S-Video inputs only work with S-Video outputs. 1 HE/U or 2 HE/U rack mount case is standard. The VEEMUX® CAT5 Audio/Video Matrix Switcher works with NTI's CAT5 transmitters and receivers to create a high performance audio/video signal routing system with a maximum extension of 183 meters between the Local and Remote Units. The VEEMUX CAT5 Audio/Video Matrix Switch is capable of connecting to as many as 32 video sources and 16 video displays. A single computer audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system. Control Methods Front Panel Interface Digital VU-Meter displays audio levels for the currently selected port. Liquid Crystal Display (LCD) displays all current connections. Locally change input and output selections with front panel buttons. RS232 Control Selectable baud rate: 4800 through 115200. Baud rate is set via the main menu, serial command, telnet or web page. Commands CS-causes one INx/OUTx connection to occur. CA-causes all inputs to connect to specified output. RO-reads what input is connected to specified output. CC-save matrix. RC-recall matrix. CB-change baud rate. RV-version information. RU-reads size of matrix, reports number of inputs and number of outputs on specified switch. Ethernet Control Configuration can be done over the Internet via web page or telnet. Web Server Security is ensured by password and user configurable timeout. Up to 25 users can access the web page at one time. The user can access the following pages: Switch page-allows the user to connect any input to any output, save and recall up to ten connection configurations, and force compensation on all ports. Setup page-configure switch settings Password page-set up a password up to 16 characters long. Help page-documentation on the usage of the web interface. Logout page-view currently active connections and logout of the web interface. Telnet Security is ensured by password. Commands are similar to RS232 commands. For prices on larger quantities & delivery times, please call or email techsales@itm-components.co.uk   Code Description Price Ex VAT Qty SM-8X8-C5AV-LCD Audio/Video Matrix Switch via CAT5 £2842.83 SM-8X16-C5AV-LCD Audio/Video Matrix Switch via CAT5 £3979.96 SM-16X8-C5AV-LCD Audio/Video Matrix Switch via CAT5 £2936.23 SM-16X16-C5AV-LCD Audio/Video Matrix Switch via CAT5 £4036.81 SM-32X8-C5AV-LCD Audio/Video Matrix Switch via CAT5 £5779.06 SM-32X16-C5AV-LCD Audio/Video Matrix Switch via CAT5 £8033.02

Online Zone

Account Registration Member Log-in

Buying On-line

Buying On-line View Your Basket

Secure Payments

Delivery Returns Procedure Terms & Conditions

Copyright © 2012 ITM Components Limited all rights reserved

www.intergage.co.uk | Web Design in Dorset