NTI Environmental Sensors & accessories

Products Environment Monitoring NTI Environmental Sensors & accessories

Product Listing

Listing Products 1 to 10 of 18

Pages: 1 2 >>

ENVIROMUX-STS Temperature Sensor

Applications from -20°C to 60°C (-4°F to 140°F).
Accurate to within ±0.75°C (±1.35°F).
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

Price: £43.45 (£49.97 Inc VAT)

Quantity:

Enviromux-SHS Humidity Sensor

Applications from 20% to 80% relative humidity at temperatures between -20°C to 40°C (-4°F and 104°F).
Accurate to within ±5% relative humidity.
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

Price: £60.83 (£69.95 Inc VAT)

Quantity:

Envoromux-STHS Combined Temperature & Humidity Sensor

Applications from -20°C to 60°C (-4°F to 140°F) and 20% to 80% relative humidity.
Accurate to within ±0.75°C (±1.35°F) and ±5% relative humidity.
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

Price: £73.86 (£84.94 Inc VAT)

Quantity:

Enviromux-LDS Liquid Detection Sensor

For warning of flooding.
Detects liquid depth >0.1".
Minimum puddle: 0.6" diameter.
100% waterproof electronics.
Detects any liquid, except deionized water.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

See Product Options for prices and various cable lengths

Enviromux-M-DCS-SM Door Contact Sensor

Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
Can also be used for monitoring side wall and covers.
Includes mounting hardware.
For normally closed circuit connection.
2-wire interface.
Screw terminal.
Maximum cable length: 305 meters.
Wide actuating gap, approximately 25 mm.
Dimensions WxDxH (mm): 13x13x51 (Switch), 13x13x51 (Magnet).

Price: £3.98 (£4.58 Inc VAT)

Quantity:

Enviromux-IMD Infrared Motion detector

Registers movement in the area covered.
Condition display via LED.
Provides immunity from common-mode signals such as the effect of strong hot or cold air currents, variation in ambient
temperature, background radiation and acoustic noise.
24 dual-element detection zones for long, mid and short range protections.
Surface or corner mounting
Pulse count or single shot triggering.
Good RFI protection.
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £47.79 (£54.96 Inc VAT)

Quantity:

Enviromux-IMD-MW Mini Infrared Motion Detector

Detects movement across the detection field.
Provides substantial immunity to false alarms caused by environmental disturbances.
Pulse count or single shot triggering.
Good RFI protection. Dimensions
WxDxH (mm): 56x30x74
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £43.45 (£49.97 Inc VAT)

Quantity:

Enviromux-IMD-CM Ceiling Mount Infrared Motion Detector

Detects movement across the detection field.
360° detection pattern.
113° conical detection angle from ceiling.
36' diameter protection when mounted 12' high.
Provides substantial immunity to false alarms caused by environmental disturbances.
Pulse count or single shot triggering.
Good RFI protection
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £43.45 (£49.97 Inc VAT)

Quantity:

Enviromux-VSS Vibration Sensor

For registering movement and shocks.
Adjustable sensitivity.
Includes mounting hardware.
Connect to RJ45 or digital input sensor ports.
Supports CAT5/5e/6 UTP or STP cables.
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £6.08 (£6.99 Inc VAT)

Quantity:

Enviromux-RKS Key Station

Remote key station designed for security system ON-OFF control applications.
Built with universal connection terminals; can be used freely with most security systems.
Provides momentary contact with spring return.
Standard single gang mounting box.
Built-in tamper switch.
Built-in connection terminals.
For security system and door strike applications.
Dimensions WxDxH (mm): 43x74x117

Price: £34.76 (£39.97 Inc VAT)

Quantity:

Pages: 1 2 >>