NTI Environmental Monitoring Sensors Product List

NTI Environmental Monitoring Sensors

ENVIROMUX-STS Temperature Sensor

Applications from -20°C to 60°C (-4°F to 140°F).
Accurate to within ±0.75°C (±1.35°F).
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

Price: £40.61 (Ex VAT)

Quantity:

Enviromux-SHS Humidity Sensor

Applications from 20% to 80% relative humidity at temperatures between -20°C to 40°C (-4°F and 104°F).
Accurate to within ±5% relative humidity.
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

Price: £56.86 (Ex VAT)

Quantity:

Enviromux-STHS Combined Temperature & Humidity Sensor

Applications from -20°C to 60°C (-4°F to 140°F) and 20% to 80% relative humidity.
Accurate to within ±0.75°C (±1.35°F) and ±5% relative humidity.
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

Price: £69.04 (Ex VAT)

Quantity:

Enviromux-LDS Liquid Detection Sensor

For warning of flooding.
Detects liquid depth >0.1".
Minimum puddle: 0.6" diameter.
100% waterproof electronics.
Detects any liquid, except deionized water.
RJ45 connector.
Supports CAT5/5e/6 cable up to 305 meters.

See Product Options for prices and various cable lengths

NOTE ON CABLE SELECTION - Two cables are required, the water sensor cable and a separate two wire cable. The water sensor connects to the 2-wire cable with a built-in connector, and the 2-wire cable connects to the sensor unit via screw terminal. (See diagram below).

Distributed Water Sensor Cable:
ENVIROMUX-LDS water sensor cable is available in lengths from 1 to 1000 feet, to be selected for the application. e.g The amount of distributed sensor cable to cover the area to be monitored.

Two Wire Interface/ Extension Cable
The distributed water sensor cable can be located up to 100 feet away from the LDS sensor unit via 2-wire cable.

The LDS sensor unit can be located up to 1,000 feet away from the ENVIROMUX-SEMS-16 via CAT5/5e/6 cable.

If water or other conductive liquid contacts the water sensor cable, the ENVIROMUX-LDS reports the detection to the ENVIROMUX-SEMS-16.

Enviromux-M-DCS-SM Door Contact Sensor

Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
Can also be used for monitoring side wall and covers.
Includes mounting hardware.
For normally closed circuit connection.
2-wire interface.
Screw terminal.
Maximum cable length: 305 meters.
Wide actuating gap, approximately 25 mm.
Dimensions WxDxH (mm): 13x13x51 (Switch), 13x13x51 (Magnet).

Price: £3.98 (Ex VAT)

Quantity:

Enviromux-IMD Infrared Motion detector

Registers movement in the area covered.
Condition display via LED.
Provides immunity from common-mode signals such as the effect of strong hot or cold air currents, variation in ambient
temperature, background radiation and acoustic noise.
24 dual-element detection zones for long, mid and short range protections.
Surface or corner mounting
Pulse count or single shot triggering.
Good RFI protection.
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £44.67 (Ex VAT)

Quantity:

Enviromux-IMD-MW Mini Infrared Motion Detector

Detects movement across the detection field.
Provides substantial immunity to false alarms caused by environmental disturbances.
Pulse count or single shot triggering.
Good RFI protection. Dimensions
WxDxH (mm): 56x30x74
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £37.49 (Ex VAT)

Quantity:

Enviromux-IMD-CM Ceiling Mount Infrared Motion Detector

Detects movement across the detection field.
360° detection pattern.
113° conical detection angle from ceiling.
36' diameter protection when mounted 12' high.
Provides substantial immunity to false alarms caused by environmental disturbances.
Pulse count or single shot triggering.
Good RFI protection
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 305 meters

Price: £40.61 (Ex VAT)

Quantity:

Enviromux-VSS Vibration Sensor

For registering movement and shocks.
Adjustable sensitivity.
Includes mounting hardware.
Connect to RJ45 or digital input sensor ports.
Supports CAT5/5e/6 UTP or STP cables.
Screw terminal
To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 305 meters.

Price: £5.69 (Ex VAT)

Quantity:

Enviromux-RKS Key Station

Remote key station designed for security system ON-OFF control applications.
Built with universal connection terminals; can be used freely with most security systems.
Provides momentary contact with spring return.
Standard single gang mounting box.
Built-in tamper switch.
Built-in connection terminals.
For security system and door strike applications.
Dimensions WxDxH (mm): 43x74x117

Price: £32.49 (Ex VAT)

Quantity:

Enviromux-ACK Digital Keypad

Two relay outputs controlled by two groups of independent user codes.
Output 1: 5 Amp relay for door strike
Output 2: 1 Amp relay for other control applications.
Normally closed and normally open dry contacts for both output relays.
LED indicators for operation status and system status.
Terminal block for all external connections.
Single lock or inter-lock operation.
Operate with fail-safe or fail-secure locking device.
Door open announcer.
Non-volatile memory in case of power failure.

Price: £61.73 (Ex VAT)

Quantity:

Enviromux-EBS Emergency Panic Button

Sends activation signal when button is pressed.
For normally closed or normally open circuit connections.
2-wire interface.
Screw terminal.
Maximum cable length: 1,000 ft
Dimensions WxDxH (mm): 10x23x76

Price: £3.25 (Ex VAT)

Quantity:

Enviromux-SRN-M Siren

Emits ear-piercing sound to deter intruders
Output Level: 108 dB
Dimensions WxDxH (mm): 38x43x61
Screw terminal.
2-wire interface.
Maximum cable length: 30 meters.

Price: £10.56 (Ex VAT)

Quantity:

Enviromux-2W Sensor Cables

2-wire sensor cable.
Use to connect dry contact sensors to the ENVIROMUX-SEMS-16.
Available lengths: 0.9/1.8/3/7.6/15/30 meters.

See Options for prices and cable lengths

Enviromux-STHS-99 Temperature/Wide Range Humidity Sensor

Applications from 32°F to 122°F
Accurate to within ±2°F
(0°C to 50°C, ±1°C)
20% to 80% relative humidity, ±3%
10% to 90% relative humidity, ±4%
0% to 99% relative humidity, ±5%
High resistance to external influences on the cable due to digital output signal.
Re-calibration is not necessary after initial set-up.
Includes mounting hardware.
RJ45 connector.
Supports CAT5/5e/6 cable up to 1,000 ft.(not included)
Regulatory approvals: RoHS
Compatible with ENVIROMUX-SEMS-16 only.

See PDF Datasheet For Further Technical Information

Price: £117.77 (Ex VAT)

Quantity:

Enviromux-S420MA 4-20mA Sensor Converter

External RJ45 device monitors up to two 4-20mA analog sensors
Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
Provides 18VDC, 25mA for each sensor
Connector: Screw Terminal, 8-position.
Supports CAT5/5e/6 cable up to 1,000 ft. (not included)
Includes Mounting Hardware
Regulatory approvals: RoHS.
Compatible with ENVIROMUX-SEMS-16 only.

See PDF Datasheet For Further Technical Information

Price: £85.28 (Ex VAT)

Quantity:

IP Surveillance Camera - NTI

ENVIROMUX-IPCAM

NTI ENVIROMUX-IPCAM is an IP Survelliance Camera which produces superior images and is compatible with NTI environmental monitoring range of equipment.

View & control camera from ENVIROMUX-SEMS-16 web interface
With the ENVIROMUX-SEMS-16 USB Port models, a triggered snapshot can be forwarded in alert e-mails.
A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.).

Small size Cube IP Camera - LS Vision

LS-IP30C

LS Vision LS-IP30W IP camera for home usage.

High quality CMOS progressive sensor
Advanced multi-streaming-rate real-time H.264, Motion JPEG at D1 resolution
Support 24MB pre-/post-event recording buffer
Support built-in Microphone and Speaker

700TVL Varifocal IR Camera - LS Vision

LS-VH701

LS Vision LS-VH701 weatherproof IR camera, producing superior video surveillance.

Weatherproof IR Camera
SONY Exview HAD CCD II (ICX672/3AKA)
42 pcs ￠5mm IR-LED, IR Range 35M
OSD/2D-DNR/BLC/MD/Privacy Masking
3-Axis Design, easy for installtion
Built-in 4--9mm Manual Zoom

700TVL Varifocal IR Camera - LS Vision

LS-VH702

LS Vision LS-VH702 weatherproof IR camera, producing superior video surveillance.

Weatherproof IR Camera
SONY Exview HAD CCD II (ICX672/3AKA)
72pcs of ￠5 IR leds, 50m IR distance
OSD/2D-DNR/BLC/MD/Privacy Masking
3-Axis Design, easy for installtion
Built-in 4--9mm External focusing Lens

Enviromux-TRH Temperature/Humidity sensor for ENVIROMUX MINI

Applications from 32°F to 104°F (0ºC and 40ºC) and 20% to 80% relative humidity.
High resistance to external influences on the cable due to digital output signal.
Accurate to within ±1.35°F (±0.75ºC) and ±5% relative humidity.
Re-calibration is not necessary after initial set-up.
Available lengths: 3/7/10/25 feet.
Includes mounting hardware.
Regulatory approvals: CE, FCC, RoHS

Enviromux-T Temperature Sensor for ENVIROMUX MINI

For use with ENVIROMUX-MINI.
Applications from 32°F to 104°F (0ºC to 40ºC).
High resistance to external influences on the cable due to digital output signal.
Accurate to within ±1.35°F (±0.75ºC).
Re-calibration is not necessary after initial set-up.
Available lengths: 3/7/10/25 feet.
Includes mounting hardware.
Regulatory approvals: CE, FCC, RoHS

Enviromux-RH Humidity Sensor for ENVIROMUX MINI

For use with ENVIROMUX-MINI.
Applications from 20% to 80% relative humidity at temperatures between 0ºC and 40ºC.
High resistance to external influences on the cable due to digital output signal.
Accurate to within ±5% relative humidity.
Re-calibration is not necessary after initial set-up.
Available lengths: 3/7/10/25 feet.
Includes mounting hardware.
Regulatory approvals: CE, FCC, RoHS

Enviromux-LD Liquid Detection Sensors for ENVIROMUX MINI

For warning of flooding.
100% waterproof electronics.
Detects any conductive liquid.
Puddle: 0.6" diameter.
Detects liquid depth >0.1".
Available lengths: 3/7/10/25 feet.
Regulatory approvals: CE, FCC, RoHS

Please call for prices and lengths

NOTE ON CABLE SELECTION - Two cables are required, the water sensor cable and a separate two wire cable. The water sensor connects to the 2-wire cable with a built-in connector, and the 2-wire cable connects to the sensor unit via screw terminal. (See diagram below).

Distributed Water Sensor Cable:
ENVIROMUX-LD water sensor cable is available in lengths from 1 to 1000 feet, to be selected for the application. e.g The amount of distributed sensor cable to cover the area to be monitored.

Two Wire Interface/ Extension Cable
The distributed water sensor cable can be located up to 100 feet away from the LD sensor unit via 2-wire cable.

The LD sensor unit can be located up to 1,000 feet away from the ENVIROMUX-Mini via CAT5/5e/6 cable.

If water or other conductive liquid contacts the water sensor cable, the ENVIROMUX-LD reports the detection to the ENVIROMUX-Mini.

Enviromux-TDS Tamper switch for ENVIROMUX-MINI

Price: £6.50 (Ex VAT)

Quantity: